600 Neo Wifi not Showing

600 Neo Wifi not Showing

Make sure you already configured your wifi settings. If not, Please go to this link: 

1. Run your downloaded driver file.

2. Select Modify, then click next.



3. Select Magicard 600 (V2), then input Printer's IP Address, then click next then install then finish.



4. Go to Control panel > Hardware and Sounds > Devices and Printers.

5. Select Add a printer



6. Click The printer that I want wasn't listed.



7. Select add local printer or network printer with manual settings



8. Browse IP Address of the printer. then click next.



9. Browse for Magicard Ltd. and Magicard 600 Neo. then click next.



10. choose Use the driver that is currently installed



11. Rename printer to Magicard 600NEO (Wifi), then click next.



12. Choose between sharing the printer or not. If not, click next, then finish.



You should see the printer on Devices and printer.


    • Related Articles

    • No Wifi button on Network tab of 600 Neo

      Can't see Configure wifi button? It is because you are connected via wifi driver. To connect/reconnect to Wifi, Plug in USB cable to your computer then go to Printer properties, Network Tab of USB Driver. Then you will see Configure Wifi.
    • How to setup Wifi of 600 Neo

      1. Make sure that you already installed Magicard printer Driver. If you haven't installed the driver, please go to this link. (https://support.ccs.com.ph/portal/en/kb/articles/how-to-install-600-neo-driver) Click next for Dynamic IP Address. Click ...
    • Mapped drive not showing in CardExchange

      1. Open CMD, Run as Admin. 2. Net use "Drive" "Path" /persistent:Yes Example: net use Z: "\\192.168.1.16\My Folder\Pictures" /persistent:Yes
    • How to clean Magicard 100 Neo

      Correct Cleaning Card for your Magicard Printer It is essential to use the correct cleaning card for your model of Magicard Printer. There are a few different cleaning cards available for specific models. The main difference is the length of the ...
    • How to install 600 Neo Driver

      Note: Do not Plug-in USB Cable of printer to PC before step 8 Download latest driver of Magicard 600 Neo (https://support.magicard.com/solution/driver/) Run the latest driver Select your prefered language 4. Make sure to Un-Plug the usb cable of the ...