No Wifi button on Network tab of 600 Neo
Can't see Configure wifi button?
It is because you are connected via wifi driver.
To connect/reconnect to Wifi, Plug in USB cable to your computer then go to Printer properties, Network Tab of USB Driver.
Then you will see Configure Wifi.
Related Articles
How to connect to Magicard Printers via LAN
Go to Windows ‘Devices and Printers’ Right-click on the printer icon and select Printer Properties(2)and then the Network tab. Next, click the Ethernet button (3). The Network configuration dialogue box should now be displayed. The Network ...
600 Neo Wifi not Showing
Make sure you already configured your wifi settings. If not, Please go to this link: 1. Run your downloaded driver file. 2. Select Modify, then click next. 3. Select Magicard 600 (V2), then input Printer's IP Address, then click next then install ...
How to setup Wifi of 600 Neo
1. Make sure that you already installed Magicard printer Driver. If you haven't installed the driver, please go to this link. (https://support.ccs.com.ph/portal/en/kb/articles/how-to-install-600-neo-driver) Click next for Dynamic IP Address. Click ...
How to clean Magicard 100 Neo
Correct Cleaning Card for your Magicard Printer It is essential to use the correct cleaning card for your model of Magicard Printer. There are a few different cleaning cards available for specific models. The main difference is the length of the ...
Magicard Tipid Settings - CardExchange version
This settings is for Dual sided Magicard printers only 1. Go to Print tab. 2. Select Printer Properties. 3. In Card Front Tab. Select Color/ composite black (YMC) and check the Print overcoat checkbox. 4. In Card Back. Select Monochrome (K Only). ...