How to install 600 Neo Driver

How to install 600 Neo Driver

Note: Do not Plug-in USB Cable of printer to PC before step 8
  1. Download latest driver of Magicard 600 Neo (https://support.magicard.com/solution/driver/)
  2. Run the latest driver

  1. Select your prefered language

     
      4. Make sure to Un-Plug the usb cable of the printer from the PC. Then click next



      5. Click Install



      6. Select USB & Wifi



      7. Select install



8. Once Please connect Printer via USB pop up appears, Plug-In the usb cable of the printer to the PC then click ok.



      9. Pop up of Wifi configuration will appear. Select Yes.



      10. Magicard Network Configuration will appear. Select Next and Finish. (If error occurs, please proceed to step 11) 


      11. Select Finish to end the driver installation.



    • Related Articles

    • How to install Magicard Driver (USB)

      Note: Do not Plug-in USB Cable of printer to PC before step 8 Download latest driver of Magicard (https://support.magicard.com/solution/driver/) Run the latest driver 3. Select your prefered language 4. Make sure to Un-Plug the usb cable of the ...

    • No Wifi button on Network tab of 600 Neo

      Can't see Configure wifi button? It is because you are connected via wifi driver. To connect/reconnect to Wifi, Plug in USB cable to your computer then go to Printer properties, Network Tab of USB Driver. Then you will see Configure Wifi.

    • Magicard Enduro Neo - Download guide for driver and CardExchange software

      Please click the link below to download the Enduro Neo driver Installer https://support.magicard.com/solution/magicard-neo-printer-driver/ Download anydesk for remote desktop control https://anydesk.com/en Please click the link below to download the ...

    • Magicard 360 Neo - Download guide for driver and CardExchange software

      Please click the link below to download the 360 Neo driver Installer https://support.magicard.com/solution/magicard-neo-printer-driver/ Download anydesk for remote desktop control https://anydesk.com/en Please click the link below to download the ...

    • 600 Neo Wifi not Showing

      Make sure you already configured your wifi settings. If not, Please go to this link: 1. Run your downloaded driver file. 2. Select Modify, then click next. 3. Select Magicard 600 (V2), then input Printer's IP Address, then click next then install ...