How to setup Wifi of 600 Neo

How to setup Wifi of 600 Neo

1. Make sure that you already installed Magicard printer Driver. If you haven't installed the driver, please go to this link. (https://support.ccs.com.ph/portal/en/kb/articles/how-to-install-600-neo-driver)

2. Download the Generation tools


3. Click next until finish

4. Run Generation 2 delear tool.

Note: Make sure your printer is On and USB is connected

5. Click connect


6. Select Network Tab


7. Check Wifi box. Select Wifi network and input password. Then click Connect button.


8. After connecting to wifi, Restart your printer spooler in Services or restart your printer.

Printer should now be seen on Devices and Printers.


If problem occurs. Please try this troubleshooting guide. https://support.ccs.com.ph/portal/en/kb/articles/600-neo-wifi-not-showing

    • Related Articles

    • 600 Neo Wifi not Showing

      Make sure you already configured your wifi settings. If not, Please go to this link: 1. Run your downloaded driver file. 2. Select Modify, then click next. 3. Select Magicard 600 (V2), then input Printer's IP Address, then click next then install ...

    • How to install 600 Neo Driver

      Note: Do not Plug-in USB Cable of printer to PC before step 8 Download latest driver of Magicard 600 Neo (https://support.magicard.com/solution/driver/) Run the latest driver Select your prefered language 4. Make sure to Un-Plug the usb cable of the ...

    • Anviz - How to connect the device to Crosschex via WIFI

      There are some Anviz biometrics devices that are capable of WIFI connection. The Anviz C2pro and the latest models of the Anviz biometrics are capable of WIFI connection. Such devices are able to connect to the crossschex via two ways. Either via Lan ...

    • How to Setup guard on patrol management system

      Guard Setup - This is where you name the device for a certain Guard Officer. 1. Plug the registered reader on the PC (Please see article: How to connect register WM-5000V4S and WM-5000V5 device at Patrol Management Systemfor registering of reader ...

    • Magicard Enduro Neo - Download guide for driver and CardExchange software

      Please click the link below to download the Enduro Neo driver Installer https://support.magicard.com/solution/magicard-neo-printer-driver/ Download anydesk for remote desktop control https://anydesk.com/en Please click the link below to download the ...