Whiteedge on Cardexchange printout using DNP Printer

Whiteedge on Cardexchange printout using DNP Printer

1. Open Card Designer under Configurations Tab



2. Open Page Setup


3. Under Template Tab, Change Card size from Custom to Standard.


If issue still occurs, follow below instruction.



    • Related Articles

    • DNP Printout has white edge

      If you are using Cardexchange Software, Please follow this instruction first. Whiteline-on-cardexchange-printout-using-dnp-printer If not resolved, then proceed to below instruction. Enter Maintenance menu 1. Press and hold Menu and Middle button. 2. ...

    • Misaligned Printout on DNP

      Sample of Misaligned Printout To fix this, 1. Remove Retransfer cartridge 2. Look for a screw on the upper right corner of Retransfer cartridge slot. Please see below image for reference. 3. Rotate the screw counter clockwise 5 times and print a ...

    • CardExchange Installation and Activation Guide

      1. Install CardExchange. (Latest version can be downloaded here https://cardexchangeid.com/support/resources/downloads) If Microsoft Access Database Engine is not installed to your computer, a prompt to install will pop up. This process requires ...

    • White margin around the edge of the printout

      White edge on printout is normal for Direct to Card printers. If you need a printer with no visible white edge. You can use Retransfer printer as an alternative solution. To minimize the white edge on printout. 1. Open Generation tool (run as admin) ...

    • PCP21CT.DLL error CardExchange

      1. Download PCP21CT.DLL here PCP21CT.DLL If you have no access, request file to http://ccs.com.ph chatbox 2. Go to C:\Program Files (x86)\CardExchange Solutions\CardExchange Gateway and rename the PCP21CT.DLL file to PCP21CT_old.DLL 3. Paste the ...