Whiteline on Print output

Whiteline on Print output




    • Related Articles

    • Faded image output - Magicard ID Printer

      1.Power supply  - Check the power supply wattage and voltage output, if it's match to the required power of printer. 2.Printhead power - try to increase the printhead power, Go to image then printhead power options, and try to increase the color ...

    • Magicard Printer can't print

      1. Go to "Control Panel" and find "Devices and Printers" 2. Remove/Unplug your printer's USB from your computer. 3. Right-click your printer in Control Panel and choose Remove device. 4. After removing all Magicard printers, Plug the printer's USB ...

    • Magicard Neo 100 - Printing on rewriable card

      Card Printer Magicard Pronto 100 Magicard Pronto 100 Thermal ID printer is where you can print erase and reprint up to 50 times on a single card without using an ink ribbon. set up the ID printer  first is remove the ribbon inside and close the door ...

    • Magicard Printers - Can't print on the CardExchange software or can't print directly

      This is the screenshot in (Devices and Printers) As you can see on the picture above there are 4 Magicard Enduro don't get confused because the highlighted one is the printer driver that you are using right now. - Magicard Enduro3E (V2) Because the ...

    • Magicard Enduro Neo - Download guide for driver and CardExchange software

      Please click the link below to download the Enduro Neo driver Installer https://support.magicard.com/solution/magicard-neo-printer-driver/ Download anydesk for remote desktop control https://anydesk.com/en Please click the link below to download the ...