Turnstile arm is not aligned?

Question:

What causes the arm of the turnstile to dis-align?

Answer:

Forced turning of arm when you have no access can cause the arm to dis-align so you should never force to turn the arm to avoid this problem. But if by some circumstance this happens. Do not worry! we have a solution for this! Here is a quick video trouble shooting guide on how to align the arm of the turnstile in to its right position.

• Related Articles

• Activating Free pass on Turnstile

  There are thirty one different functions that you can use in the turnstile, one of which is the Free pass function. What is Free pass? Free pass is a function of the turnstile in which by the name itself, it gives free access to the turnstile where ...

• Namiton CNT-SW120 Fully Automatic Tripod Turnstile integration with Anviz VF30 Biometrics

  Namiton CNT-SW120 Fully Automatic Tripod Turnstile integration with Anviz VF30 Biometrics

• Misaligned Printout on DNP

  Sample of Misaligned Printout To fix this, 1. Remove Retransfer cartridge 2. Look for a screw on the upper right corner of Retransfer cartridge slot. Please see below image for reference. 3. Rotate the screw counter clockwise 5 times and print a ...

• How to Align the Holopatch

  Follow the steps below to properly align the HoloPatch with the gold patch and colour hole. Step 1 — Open Security Options Go to: Printing Preferences → Card Front → Security Options… Step 2 — Centre the Tile Use the X / Y adjustment to centre the ...