This guide explains how to download and install the correct Magicard printer driver on your PC or laptop using a USB connection.

Step 1: Download the Printer Driver

Download the driver that matches your Magicard printer model.

• Standard Magicard printers: Download Magicard Drivers

• Magicard NEO Series: Download Magicard NEO Printer Driver

Once the download is complete, locate the downloaded installer on your computer.

Step 2: Start the Installation

1. Open the downloaded Magicard driver application.

2. Select your preferred language.

3. Click OK to continue.

Step 3: Disconnect the Printer

Before proceeding, make sure your Magicard printer is disconnected from your PC or laptop.

The printer must remain disconnected during the initial installation steps to ensure the driver installs properly.

Click Next to continue.

Step 4: Install the Driver

1. Click Install when prompted.

2. Select your preferred setup type. For this guide, select the USB connection option.

3. Click Next.

4. Read the End User License Agreement (EULA).

5. Click Install to proceed.

Wait several minutes while the installation process completes.

Step 5: Connect the Printer

When the installation window prompts you to connect the printer:

1. Turn on your Magicard printer.

2. Connect the printer to your PC or laptop using a USB cable.

3. Click OK in the installation window.

Step 6: Confirm the Installation

Once the installation finishes, a confirmation window should appear indicating that the driver was installed successfully.

To verify the installation:

1. Open Devices and Printers on your PC.

2. Check whether your Magicard printer appears in the list.

If the printer is listed, the driver installation should be complete.