Make sure the unit's ready lcd is on 1. Go to control panel > Bluetooth and Devices > Printers and scanners. 2. Find "POSTEK0F55" then add device. Password is "1234" 3. Go back to Windows Settings > Bluetooth and Devices > Devices > More devices and ...
1.Click Printer options. 2. Look for the device connected then click OK. 3.Click Printer properties 4. Check the Duplex printing click both sides Click apply. 5.Click Card Front /Card back Select your prefered Color format for your layout click ...
1. Select Options 2. Select Printer Properties 3. Select Both sides 4. Select your desired Color Format for Front and Back layout. 1. Color / Composite black (YMC) means you will print black color using Yellow / Magenta / Cyan ribbon panels and ...
The print range on Retransfer film is bigger than actual print range on the card. Following figure shows it. There should be a marging of 1.0±0.5mm on each side of the card.
This settings is for Dual sided Magicard printers only 1. Go to Options. 2. Select Printer Properties. 3. In Card Front Tab. Select Color/ composite black (YMC) and check the Print overcoat checkbox. 4. In Card Back. Select Monochrome (K Only). Make ...