How to print dual sided to Magicard Printer via Windows Print

How to print dual sided to Magicard Printer via Windows Print

1. Select Options



2. Select Printer Properties



3. Select Both sides



4. Select your desired Color Format for Front and Back layout.



1. Color / Composite black (YMC) means you will print black color using Yellow / Magenta / Cyan ribbon panels and prints dark color of grey.
2. Color / Resin black (YMCK) means you will print black color using Black ribbon panel and prints dark color of black.
3. Monochrome (K only) means you will only use one color.  if you are using YMCKO ribbon. it will only print Black color.
For tipid hacks.
Select YMC in front (Print overcoat is checked) then
Select K only in back (Print over is unchecked)

Make sure to follow this intructions to waste of ribbon.

5. Double check your settings and print.

    • Related Articles

    • Dual sided print settings of CardExchange

      1.Click Printer options. 2. Look for the device connected then click OK. 3.Click Printer properties 4. Check the Duplex printing click both sides Click apply. 5.Click Card Front /Card back Select your prefered Color format for your layout click ...

    • Magicard Tipid Settings - Windows print version

      This settings is for Dual sided Magicard printers only 1. Go to Options. 2. Select Printer Properties. 3. In Card Front Tab. Select Color/ composite black (YMC) and check the Print overcoat checkbox. 4. In Card Back. Select Monochrome (K Only). Make ...

    • Magicard Tipid Settings - CardExchange version

      This settings is for Dual sided Magicard printers only 1. Go to Print tab. 2. Select Printer Properties. 3. In Card Front Tab. Select Color/ composite black (YMC) and check the Print overcoat checkbox. 4. In Card Back. Select Monochrome (K Only). ...

    • Magicard Tipid Settings

      For CardExchange version: https://support.ccs.com.ph/portal/en/kb/articles/magicard-tipid-settings-cardexchange-version For Windows print version: https://support.ccs.com.ph/portal/en/kb/articles/magicard-tipid-settings-windows-print-version

    • Magicard Printers - Dual sided settings (Full Guide)

      This is the step by step guide for changing the settings of the printer using Windows print and CardExchange. For Windows Printing to access the printer driver follow these steps: If you are using CardExchange Software, to access the printer driver ...