Follow the steps below to install the Magicard printer driver using a USB connection.

Important: Do not connect the printer's USB cable to the computer until Step 8. Connecting it too early may interrupt the installation process.

Step 1: Download the Magicard Driver

Download the latest Magicard printer driver from the official website:

Download Magicard Printer Drivers

Step 2: Run the Driver Installer

Locate the downloaded driver file and run it to start the installation process.

Step 3: Select Your Preferred Language

Choose your preferred language, then proceed to the next step.

Step 4: Confirm the USB Cable Is Disconnected

Make sure the printer's USB cable is unplugged from the computer.

Once you have confirmed that the cable is disconnected, click Next.

Step 5: Start the Installation

Click Install to proceed.

Step 6: Select the Connection Type

Select USB & Wi-Fi as the connection option.

Step 7: Install the Driver

Click Install to begin installing the printer driver.

Wait for the installation process to continue.

Step 8: Connect the Printer via USB

When the “Please connect Printer via USB” message appears:

1. Connect the printer's USB cable to the computer.

2. Click OK.

Note: Only connect the USB cable when prompted by the installer.

Step 9: Complete the Installation

Click Next, then click Finish to complete the driver installation.

The Magicard printer driver installation is now complete.