How to install bare driver files

How to install bare driver files

1. Download driver bare files. Magicard bare driver file

2. Unzip the bare driver file

3. Go to Control panel > Hardware and Sounds > Devices and Printers.

4. Right click Printer. Then select printer properties.



5. Select Advanced Tab. and click New Driver button.



6. Click Next. Then Have disk.



7. Select browse. Then go to the folder of bare driver files and select magu.inf then click open then click ok.



8. Browse Magicard 600NEO, then click next, then finish.




    • Related Articles

    • How to install Magicard Driver (USB)

      Note: Do not Plug-in USB Cable of printer to PC before step 8 Download latest driver of Magicard (https://support.magicard.com/solution/driver/) Run the latest driver 3. Select your prefered language 4. Make sure to Un-Plug the usb cable of the ...

    • How to install 600 Neo Driver

      Note: Do not Plug-in USB Cable of printer to PC before step 8 Download latest driver of Magicard 600 Neo (https://support.magicard.com/solution/driver/) Run the latest driver Select your prefered language 4. Make sure to Un-Plug the usb cable of the ...

    • Magicard Enduro Neo - Download guide for driver and CardExchange software

      Please click the link below to download the Enduro Neo driver Installer https://support.magicard.com/solution/magicard-neo-printer-driver/ Download anydesk for remote desktop control https://anydesk.com/en Please click the link below to download the ...

    • Magicard 360 Neo - Download guide for driver and CardExchange software

      Please click the link below to download the 360 Neo driver Installer https://support.magicard.com/solution/magicard-neo-printer-driver/ Download anydesk for remote desktop control https://anydesk.com/en Please click the link below to download the ...

    • CardExchange - How to install and apply your own font?

      Install your personalized font.  Double Click .tff. Click Install. Open your card exchange.  Go to > Card Designer. Click Text Object. Click Text Tab.  Change your font design.  Go to > Visibility Tab.  Check "Pre-rendering Flag this object for ...