How to get Firmware version of DNP

How to get Firmware version of DNP

1. Open Status monitor
Note: If your printer is CX-D80DS use CX-D80 Status monitor. If your printer is CX-D80HS use CX-D80H Status monitor.


2. Go to Property tab.

    • Related Articles

    • How to get firmware of DNP CX-D80

      1. Open Status monitor 2. Go to Property Tab and take a screenshot.

    • DNP printer Transport Mode

      Transport mode When transporting or moving the printer, ensure that the heating roller is fastened to a safe position by turning on Transport mode. Make sure that you set the printer to transport mode when transporting or moving the printer. Failure ...

    • How to get printer query file

      Windows 7 to 10: https://support.ccs.com.ph/portal/en/kb/articles/how-to-get-printer-query-windows-10 Windows 11: https://support.ccs.com.ph/portal/en/kb/articles/how-to-get-printer-query-windows-11

    • How to adjust layout for DNP printer

      This is an illustration how DNP prints the layout The DNP Printer cuts the layout and prints only the inner side of the border. The outter side of the border stays on the retransfer film. For your layout to be fitted. Make sure to adjust your layout ...

    • Licensed CardExchange becomes Demo version

      CardExchange license can ONLY be applied and activated to a single piece of hardware at a time. Each license has 4 reactivations. meaning you can reactivate or transfer your license to another computer 4 times. Licensed CardExchange becomes Demo ...