How to create guard patrol plan for patrol management system
· Plan
Setup - This is where you put the time schedule of the Tags to be read by
specific guard patrol1. Go to Patrol setup>Plan setup
2. Click
“Add plan” make a plan name, select checkpoints,
3. In
Check point tab, Choose check point or Click “Add all” to select the checkpoint
for this Plan
4. Click Patrol Schedule>Batch Schedule
5. Set the Begin Time and End Time
6. In “Time for One Patrol Round” Set the minutes
of every Patrol Round
(Note:
if the time will jump to the following day let say 11:00 pm to 2:00 am click
Next Day)
7. Click
“Confirm”
8. After
the plan is setup make sure to assign a reader by clicking “Assign Reader”
9. Click “Assign Reader”
10. Click
on the Reader Code and Confirm.
~end
Related Articles
How to Setup guard on patrol management system
Guard Setup - This is where you name the device for a certain Guard Officer. 1. Plug the registered reader on the PC (Please see article: How to connect register WM-5000V4S and WM-5000V5 device at Patrol Management Systemfor registering of reader ...How to download data from Guard patrol device to Patrol management system
1. Plug the registered reader on the PC (Please see article: How to connect register WM-5000V4S and WM-5000V5 device at Patrol Management Systemfor registering of reader tutorial) 2. Click "Basic Operations" 3. Click Read Data 4. To View the ...How to add check point on patrol management system
· Checkpoint setup – to create checkpoint names for the RF tags. Recommendation: Use the name of the area and set it on checkpoint name for convenience. 1. Plug the registered reader on the PC (Please see article: How to connect ...How to connect register WM-5000V4S and WM-5000V5 device at Patrol Management System
1. Connect the reader to your computer using the USB cable provided 2. Click "Patrol Setup" 3. Click “Register reader” 4. The reader will automatically connect to your computer, if it is successful this window will show and click exit. 5. Click ...How to create CardExchange login account
This feature is only available to CardExchange Premium edition and up. Under Configuration tab, Check Enable logins feature Automatically, there is a created Admin account. 2. Input Fullname and Password of the Admin account. 3. Select Next then ...