How to connect Postek IQ200 using Bluetooth
Make sure the unit's ready lcd is on1. Go to control panel > Bluetooth and Devices > Printers and scanners.
2. Find "POSTEK0F55" then add device.
Password is "1234"
3. Go back to Windows Settings > Bluetooth and Devices > Devices > More devices and printer settings.
4. Right click "POSTEK0F55" then select Properties.
5. Go to Hardwarde tab and look for Com port
6. Close POSTEK0F55 properties then find POSTEK IQ200 USB Printer.
7. Right click POSTEK IQ200 then select Printer Properties.
8. Go to Ports tab and Select the Com port showed on "POSTEK0F55" Properties.
9. Click Apply and Ok.
10. Right click Postek IQ200 and select Printer properties again then do Test print
Related Articles
How to rewrite stickers using MAWARI UHF reader
If you don't have a UE600 uhf Reader/Writer you can use your MAWARI UHF reader to rewrite your stickers. NOTE: using the MAWARI UHF reader to rewrite the UHF stickers can be a bit tedious compared to using a UE600 reader/writer NOTE: You will also ...Anviz - How to export records from device and import to crosschex using USB flash drive
There are several ways to get your biometrics records to crosschex standards one of which is by using usb flash drive. why use flash drive to get the records? there might be some instances where the device is not connected to the network. You can use ...How to connect to Magicard Printers via LAN
Go to Windows ‘Devices and Printers’ Right-click on the printer icon and select Printer Properties(2)and then the Network tab. Next, click the Ethernet button (3). The Network configuration dialogue box should now be displayed. The Network ...How to connect register WM-5000V4S and WM-5000V5 device at Patrol Management System
1. Connect the reader to your computer using the USB cable provided 2. Click "Patrol Setup" 3. Click “Register reader” 4. The reader will automatically connect to your computer, if it is successful this window will show and click exit. 5. Click ...Anviz - How to import/export users from device and Crosschex standards using USB flash drive
There are several ways to import and export users to the anviz device and crosschex standards one of which is by means of a USB flash drive. In this guide, you will learn how to do so. 1. You will need a USB Flashdrive and the Anviz Biometrics ...