How to adjust layout for DNP printer

How to adjust layout for DNP printer

This is an illustration how DNP prints the layout



The DNP Printer cuts the layout and prints only the inner side of the border.
The outter side of the border stays on the retransfer film.



For your layout to be fitted.
Make sure to adjust your layout and add more space on sides (atleast 1mm per side).


    • Related Articles

    • DNP printer Transport Mode

      Transport mode When transporting or moving the printer, ensure that the heating roller is fastened to a safe position by turning on Transport mode. Make sure that you set the printer to transport mode when transporting or moving the printer. Failure ...

    • How to get DNP Printer Logs

      1. Run latest CX-D80 Maintenance tool as administrator. (CX-D80_MT(18_12_26_0) 2. Select Printer select 3. Select Exit 3. Select logs 4. Select Output logs and click ok. 5. drag to select all logs then copy all text and paste it on notepad then save.

    • How to add color conversion to DNP

      1. Make sure to install Color Conversion Data during printer driver installation. 2. Open Printer preferences and check Enable the look-up table 3. Select Enable the look-up table settings. 4. Click select button then change extension from .CSV to ...

    • Printer not connected or offline

      1. Open the Control Panel: Click on the "Start" menu or press the Windows key, then type "Control Panel" and select it from the search results. 2. View Devices and Printers: In the Control Panel, locate and click on the "Devices and Printers" option. ...

    • Magicard Printers - Back layout rotated to 180

      Solution:  Select Front and Back Layout > Right click > Print. Click Option.  Printer Properties. Click Card Back.  Check Rotate 180 > Apply > OK.