Magicard Printers - Back layout rotated to 180

Magicard Printers - Back layout rotated to 180

Solution: 


  1. Select Front and Back Layout > Right click > Print.
  1. Click Option. 



  1. Printer Properties.

  1. Click Card Back. 

  1. Check Rotate 180 > Apply > OK.



    • Related Articles

    • Magicard Printers - Dual sided settings (Full Guide)

      This is the step by step guide for changing the settings of the printer using Windows print and CardExchange. For Windows Printing to access the printer driver follow these steps: If you are using CardExchange Software, to access the printer driver ...

    • Magicard Printers - Can't print on the CardExchange software or can't print directly

      This is the screenshot in (Devices and Printers) As you can see on the picture above there are 4 Magicard Enduro don't get confused because the highlighted one is the printer driver that you are using right now. - Magicard Enduro3E (V2) Because the ...

    • MAGICARD ID PRINTER CAN'T DETECT? (step by step troubleshooting guide)

      1. Please check the printer if it's turned on. if not, please check if the power cable is not loosen or it is fitted on your power outlet the adapter should have a light indicating that the adapter has a power. if you don't see a light on the adapter ...

    • Magicard Printer can't print

      1. Go to "Control Panel" and find "Devices and Printers" 2. Remove/Unplug your printer's USB from your computer. 3. Right-click your printer in Control Panel and choose Remove device. 4. After removing all Magicard printers, Plug the printer's USB ...

    • Magicard Printers - Safety Instructions

      SAFETY INSTRUCTIONS: To prevent electric shock do not remove covers. Do not attempt to service the printer yourself. There are no user serviceable parts inside. In the event of malfunction, refer servicing to your printer’s supplier. Use only a power ...